Quinn C-More Mount allows you to mount the scope on it's side 90* with the lowest bore to reticle, distance possible. Both of the mounts make parallax a thing of the past. The gun will shoot very flat from 10ft to 100yrds. There is no need to hold above close targets. I see about 1 inch offset to 50yds.
-The ejection port is completely clear which allows the gun to eject perfectly weather you are using new brass or many times fired/mixed head stamp… you will see a marked improvement over conventional mounts.
-Easy of adjustment. With this mount no special tools are required and the slide need not be removed to zero the scope. There is a slot cut in the bottom of the mount which allows you to adjust like normal. The only difference is windage and elevation are swapped.
You can see high-speed video here:
http://www.youtube.com/watch?v=F-_d1WW0WiY-The mount is ultra stable and very little vibration is present during recoil. Another benefit of the mount is the ability to shoot over close props without shooting through the prop. We shoot open guns as well as design for them. We all have taken a Mike for bouncing one off a prop because of, "scope offset" this problem is virtually gone.
-Warrantee. If our product is ever broken, cracked or a house falls on it with a girl in red slippers, we will replace it less shipping cost. As long as the mount has not been modified, I know how you guys like grinders, we will replace it at no cost to you.
Quinn Engineering